Flexible Solutions - Cover and Conserve Fish Background
Home Products Investor Information Media About Contact Order
WaterSavr heatsavr ecosavr

 

Heatsavr

PLEASE NOTE NEW WEBPAGES:

www.liquidpoolcovers.com

Saving Money For Your Pool Since 1991

Pool photo taken prior to adding Heatsavr   Heatsavr in use, photo taken 15 minutes later

For more information regarding this case study, click here.

 

  • Heatsavr™ is an effective "liquid solar pool cover" that greatly reduces heat loss and evaporation from your exposed pool surface.
  • Heatsavr™ is made of simple biodegradable ingredients that form the best barrier currently available to slow the heat and water loss that causes high pool room humidity, and high facility heating bills.
  • Heatsavr™ slows evaporation substantially. Evaporation is one of the main forms of heat loss from swimming pools and spas. Slowing it can yield large cost savings.
  • Heatsavr™ will lower humidity as well as evaporation. It takes money to buy heat, and heat to evaporate water, so slowing evaporation will lower humidity as well as heating costs.
  • Heatsavr™ will save energy in EVERY pool, but heat cost savings vary according to the hours of swimmer use per day, ventilation efficiency, and especially the type and cost of fuel used. The cost of energy also varies from region to region. Tests have proven that heat bill savings range from a low of 15.5% at a high use 50 meter municipal pool, to a high of 40% at a low use condominium pool.

tools and resources

Heatsavr™/Ecosavr Brochure. Please click here (5.0Mb in PDF) to view. To download, right click on link and indicate 'save target as'.

Please visit our new web pages dedicated to Heatsavr and Ecosavr: www.liquidpoolcovers.com



Common Questions about Heatsavr™

  1. Can people swim while Heatsavr™ is in use?

    Yes. Heatsavr™ has been designed to be in use 24 hours per day. This gives Heatsavr™ a distinct advantage over standard pool blankets.

  2. Can Heatsavr™ be used along with a standard pool blanket?

    Yes. Heatsavr™ will work when the blanket is off, and will reduce heat loss around the edges and tears when the blanket is on.

  3. Is Heatsavr™ safe for filters and plumbing?

    Yes. Heatsavr is a non-corrosive product that will have no detrimental effect on pipes, valves, chlorine controllers, or filters commonly used in pool applications.

  4. Is Heatsavr™ environmentally friendly?

    Yes. Not only does Heatsavr™ bio degrade into safe, simple compounds, but the reduction in energy use is especially beneficial. Swimmers in the pool won't know it's in use!

  5. Is Heatsavr™ easy to use?

    Yes. This product is very easy to use. It will take about two minutes per day to apply, and it fits easily into the pool routine. When combined with an auto injection system, it becomes even easier.


Other Information

  • For best results, Heatsavr™ should be applied once at the end of the pool-use day.
  • Add Heatsavr™ directly to the pool water at a rate of 4 oz. per 1500 sq.ft. of pool surface area (width x length).
  • Heatsavr™ may be stored for a long period of time without losing strength. Avoid storing below 65 degrees F (18.4 C). If white residue forms at the bottom, immerse bottle in warm (tap) water until residue disappears.
  • In concentrated form, Heatsavr™ is flammable and should be stored safely. If eye contact occurs, wash with water for 15 minutes and contact a physician.



Heatsavr™ Order Size and Usage Information

  • Minimum order is one case
  • Each case contains 4 x 140 oz. jugs of Heatsavr™, a total of 560 oz. per case
  • Need to add 1 oz. per 400 sq. ft. every day for commercial pools
  • Product may be applied manually, or through the use of an automatic pump
  • Product is shipped via UPS and takes approximately one week to arrive

For information about how to purchase Heatsavr™, please visit the How to Order section of this site.

 



Top of Page || Home | Products | Investor Info | Media | About | Contact | Order