 |
|
|
Saving Money For Your
Pool Since 1991
 
For more information regarding this case study, click here.
- Heatsavr™ is an effective "liquid pool cover" that
greatly reduces heat loss and evaporation from your exposed pool surface.
- Heatsavr™ is made of simple biodegradable ingredients that form
the best barrier currently available to slow the heat and water loss
that causes high pool room humidity, and high facility heating bills.
- Heatsavr™ slows evaporation substantially. Evaporation is one
of the main forms of heat loss from swimming pools and spas. Slowing
it can yield large cost savings.
- Heatsavr™ will lower humidity as well as evaporation. It takes
money to buy heat, and heat to evaporate water, so slowing evaporation
will lower humidity as well as heating costs.
- Heatsavr™ will save energy in EVERY pool, but heat cost savings
vary according to the hours of swimmer use per day, ventilation efficiency,
and especially the type and cost of fuel used. The cost of energy also
varies from region to region. Tests have proven that heat bill savings
range from a low of 15.5% at a high use 50 meter municipal pool, to
a high of 40% at a low use condominium pool.
Heatsavr™ Brochure. Please click here
(2.46Mb in PDF) to view. To download, right click on link and indicate 'save target as'.
Common Questions about Heatsavr™
- Can people swim while Heatsavr™ is in use?
Yes. Heatsavr™ has been designed to be in use 24 hours per
day. This gives Heatsavr™ a distinct advantage over standard
pool blankets.
- Can Heatsavr™ be used along with a standard pool blanket?
Yes. Heatsavr™ will work when the blanket is off, and will
reduce heat loss around the edges and tears when the blanket is on.
- Is Heatsavr™ safe for filters and plumbing?
Yes. Heatsavr is a non-corrosive product that will have no detrimental
effect on pipes, valves, chlorine controllers, or filters commonly
used in pool applications.
- Is Heatsavr™ environmentally friendly?
Yes. Not only does Heatsavr™ bio degrade into safe, simple
compounds, but the reduction in energy use is especially beneficial.
Swimmers in the pool won't know it's in use!
- Is Heatsavr™ easy to use?
Yes. This product is very easy to use. It will take about two minutes
per day to apply, and it fits easily into the pool routine. When combined
with an auto injection system, it becomes even easier.
Other Information
- For best results, Heatsavr™ should be applied once at the end
of the pool-use day.
- Add Heatsavr™ directly to the pool water at a rate of 4 oz.
per 1500 sq.ft. of pool surface area (width x length).
- Heatsavr™ may be stored for a long period of time without losing
strength. Avoid storing below 65 degrees F (18.4 C). If white residue
forms at the bottom, immerse bottle in warm (tap) water until residue
disappears.
- In concentrated form, Heatsavr™ is flammable and should be stored
safely. If eye contact occurs, wash with water for 15 minutes and contact
a physician.
Sign-up to receive ongoing Heatsavr™ information and news:
Heatsavr™ Order Size and Usage Information
- Minimum order is one case
- Each case contains 4 x 140 oz. jugs of Heatsavr™, a total of
560 oz. per case
- Need to add 1 oz. per 400 sq. ft. every day for commercial pools
- Product may be applied manually, or through the use of an automatic
pump
- Product is shipped via UPS and takes approximately one week to arrive
For information about how to purchase Heatsavr™,
please visit the How to Order section
of this site.
Top of Page || Home | Products | Investor Info | Media | About | Contact | Order
|
|
